Silicone additve MAPF SIL 94
MAPF SIL 94 is a highly effective anhydrous silicone product based on polymethylhydrosiloxane.
Application
Water-repellent treatment of plaster, gypsum board, tongue-and-groove boards, and gypsum fiber construction boards.
MAPF SIL 94 is introduced into a metered amount of water for mixing the plaster. The addition of only 0.2-0.4% MAPF SIL 94 leads to a noticeable reduction in water absorption in accordance with DIN EN 520.
The effectiveness of MAPF SIL 94 depends on the type of plaster, the water-to-gypsum ratio, and the presence of additives such as starch/cellulose or surfactants. For this reason, it is impossible to recommend an exact dosage of MAPF SIL 94. The required amount of water repellent must be determined empirically.
Alkaline components of plaster/gypsum can lead to a reduction in the bulk density and water-repellent properties of the plaster.
Main characteristics
Appearance colorless liquid
Odor not characteristic
Density at 25°C, g/cm3 ∽ 1.0
Active component content, wt. % ∽ 100
Viscosity, kinematic 25°C, mm²/s 20-25
Flash point, °C > 110
Ignition temperature (liquid), °C 285
Refractive index ∽ 1.396
Volatile compounds, wt. % < 1.5


